Stainless Fittings, Steel , Pipe Fittings, Steel Pipe Fittings, Stainless Steel Fittings, Butt Weld Fittings, Carbon Steel Fittings, Stainless Steel Pipe Fittings, all are butt weld, including Long Radius 90 Degree Elbow, Short Radius 90 Elbow, Extra Long Radius 90 Pipe Elbow, Long Radius 45 Degree Elbow, Short Radius 45 Elbow, Extra Long Radius Elbow 45, Long Radius 180 Elbow (Pipe Bend), Short Radius 180 Pipe Elbow (180 Return Bend) , Extra Long Radius 180 Tube Elbow (180 Return Bend), Equal Tee, Reducing Tee, Y Branch Tee, Cross, Reducing Cross, Eccentric Reducer, Concentric , Lap Joint Stub End and Pipe Cap in stainless steel and carbon steel material.
ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43 DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 EN: EN10253-1, EN10253-2 ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings ASME B16.9 – Factory-Made Wrought Fittings Buttwelding ASME B16.25 – Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns MSS SP-43 –…
Carbon Steel: – ASTM A105, ASTM A350 LF1/2, ASTM A181 Alloy Steel: – ASTM A182F1 /F2 /F5 /F7 /F9 /F11 /F12 /F22 Stainless Steel: – ASTM A182F6 /F304 /F304L /F316 /F316L/ F321/F347/F348 Duplex Steel S31803 / S32205 Super Duplex Steel S32750 S32760 ASME B16.5 Flanges The ASME B16.5 standard covers NPS 1/2 through NPS 24…
Carbon Steel Flange: ASTM A 105 Stainless Steel Flange: ASTM A 182 Size: 1/2”-60” (DN15-DN3000) Pressure class: Class150-Class2500 Facing: RF/ FM/ M/ T G/ RF / FF / RTJ ASTM A105 & A182 Material Can Produce Flanges of Types ASTM A105 & A182 Material Can Produce Flanges : Threaded Flanges,Welding Neck Flanges ,Lap Joint…
Steel Pipe Elbow, tee, reducer, head, cap, the materials are; carbon steel, stainless steel, alloy steel, special alloy steel, duplex stainless steel, etc.; In the pipeline system, the elbow is a pipe fitting that changes the direction of the pipeline. According to the angle, there are 45° elbow and 90° elbow and 180° elbow. In…
Standard: ASTM A335 grade:P1, P2,P5,P9,P11,P91,P92 OD:10.3-660mm WT:1.6-60mm Length:5.8m-12m or random legth Technical: Quenching & Tempering Application: Gas fire power plant, coal fire power plant, headers and steam lines, Feedwater pipes, superheaters, and reheaters. ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall…
The pre-insulated steel pipe is composed of carrier steel pipe, HDPE Casing pipe and jacketed foaming, which is used for insulation and cooling of indoor and outdoor pipelines, central heating pipelines, central air conditioning pipelines, chemical industry, medicine and long-distance transportation pipelines of petroleum. The above ground pre-insulated 90°/45° elbow is a type of fiberglass…
Products: 45°Elbow,45 Degree steel elbow,45 degree elbow,45 degree LR elbow, 45 degree stainless steel elbow, 45 degree carbon steel elbow, 45 degree alloy steel elbow,45Degree SR elbow, 45 degree ASME B16.9 seamless elbow Size: Seamless (SMLS) Elbow: 1/2”-24” ,DN15-DN600, Butt Welded Elbows(SEAM)24”-72”,DN600-DN1800 Type: LR 30°,45°,60°,90°,180° SR 30° 45°,60°,90°,180° Thickness: SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS. Standard: ASME B16.9,ASTM…
Pipe caps fit over or are welded onto the end of a pipe, providing a liquid or gas tight seal.Caps are stocked in Carbon Steel, Alloy steel, and Stainless (304 and 316) Steel.Carbon steel pipe cap is also known as head cap which is used to weld or install on the male thread of end…
Cross A pipe cross is a kind of pipe fitting that be used in the place where four pipes meet together. Cross Fitting type: weld on cross, Material: Carbon Steel per ASTM SA-234 Grade B, Dimensions conform to ASME B16.9,The pipe cross may have one inlet and three outlets, or there inlets and one outlet.…
What Is The Pipe Reducer A reducer is a component in a piping system that changes the pipe size from a larger to a smaller bore. A reducer allows for a change in pipe size to meet flow requirements or to adapt to existing piping. The length of the reduction is usually equal to the…